Showing posts with label Myford. Show all posts
Showing posts with label Myford. Show all posts

Sunday, 8 December 2013

getting a handle


In the process of setting up and testing the newly acquired lathe:



I went ahead and turned some aluminium pieces to repair a useful but poorly made rolling cart. The plastic handle had cracked where it met the telescoping tubes coming out of the body of the cart itself. The plugs are 1/2" diameter, 1-3/4" long blanks sawn off a rod, faced, drilled & tapped 1/4-20. They are cross-drilled and tapped 10-24 to re-attach to the tubes. The handle is a wooden dowel shaped on a disc sander and counterbored to accept the plugs. 1/4-20 countersunk bolts were used to connect the plugs to the handle. Since everything fits, I can take it apart to polish the aluminium and varnish the wood.



the lucky coin has two sides


Sometimes you get lucky. I was recently able to acquire a 1952 vintage Myford ML7 lathe. It is in good shape for its age, but still requires some TLC before returning to active service. The lathe came with many accessories that were purchased by the original owner. generic ML7 info

(note: the entire machine had been greased instead of oiled - this proved to be a problem and the machine was shelved until space and time permit a full teardown)

Once I move into a larger workspace, the lathe will be set up and put to use. It has several advantages over the Taig lathe (small size is NOT one of them) including self-act longitudinal feed, screwcutting via changegears, and a geared headstock capable of low RPM parting & turning.

Model-specific reference texts were obtained from Camden Miniature Steam Services and the requisite English-spec gauges, taps, & dies from RDG Tools in the UK. Service was excellent from both vendors.